Rohde & Schwarz ESW Series - LXI Settings; Wideband; Revision String; Resetting the Factory Revision

Network and Remote Operation
R&S
®
ESW
405User Manual 1177.6298.02 ─ 08
This setting is only available if a HP language is selected (see "Language"
on page 403).
Remote command:
SYSTem:HPCoupling on page 663
Wideband
This setting defines which option is returned when the *OPT? query is executed,
depending on the state of the wideband option.
It is only available for PSA89600 emulation.
"Off"
No wideband is used.
The option is indicated as "B7J".
"40 MHz"
The 40 MHz wideband is used.
The option is indicated as "B7J, 140".
"80 MHz"
The 80 MHz wideband is used.
The option is indicated as "B7J, 122".
Remote command:
SYSTem:PSA:WIDeband on page 665
Revision String
Defines the response to the REV? query for the revision number.
(HP emulation only, see "Language" on page 403).
Max. 36 characters are allowed.
Remote command:
SYSTem:REVision[:STRing] on page 666
Resetting the Factory Revision
Resets the response to the REV? query for the revision number to the factory default
(HP emulation only, see "Language" on page 403).
Remote command:
SYSTem:REVision:FACTory on page 666
14.4.4 LXI Settings
Access: [SETUP] > "Network + Remote" > "LXI" tab
On the R&S ESW the LXI Class C functionality is already installed and enabled; thus,
the instrument can be accessed via any web browser (e.g. the Microsoft Internet
Explorer) to perform the following tasks:
●
modifying network configurations
●
modifying device configurations
●
monitoring connections from the device to other devices
The "LXI" tab of the "Network + Remote" dialog box provides basic LXI functions and
information for the R&S ESW.
Alternatively, you can change the LAN settings using the LXI Web browser interface.
Network and Remote Control Settings