Rohde & Schwarz ESW Series - Page 406

Network and Remote Operation
R&S
®
ESW
406User Manual 1177.6298.02 ─ 08
For details see Chapter 14.5.1.4, "How to Configure the LAN Using the LXI Web
Browser Interface", on page 413.
Only user accounts with administrator rights are able to use LXI functionality.
Current LXI Configuration........................................................................................... 406
LXI Password..............................................................................................................406
LXI Manufacturer Description......................................................................................407
LAN Reset...................................................................................................................407
Current LXI Configuration
Displays the current LXI information from the R&S ESW (read-only).
"Current ver-
sion"
Current LXI version
"LXI Extended
Features"
Detected LXI features, such as HiSlip (see "HiSLIP Protocol"
on page 359)
"Computer
name"
Name of the R&S ESW as defined in the operating system (see also
"Computer Name" on page 399)
"MAC address"
Media Access Control address (MAC address), a unique identifier for
the network card in the R&S ESW
"IP address"
IP address of the R&S ESW as defined in the operating system (see
also "IP Address" on page 400).
"ICMP"
Indicates whether the ping responder is active or not
"VXI-11 Dis-
covery"
If enabled, connected devices are detected automatically using the
VXI-11 protocol (see "VXI-11 Protocol" on page 359)
Remote command:
SYSTem:LXI:INFO on page 664
LXI Password
Password for LAN configuration. The default password is LxiWebIfc.
Remote command:
SYSTem:LXI:PASSword on page 665
Network and Remote Control Settings