Rohde & Schwarz ESW Series - Page 614

Remote Commands in the Receiver Application
R&S
®
ESW
614User Manual 1177.6298.02 ─ 08
Parameters:
<Template> String containing the name of the template.
Example:
HCOP:TREP:ITEM:TEMP:SAVE 'myTemplate'
Saves a test report template.
Usage: Event
Manual operation: See "Template management" on page 297
HCOPy:TREPort:NEW
This command creates a new test report.
Creating a test report deletes all previously saved datasets. The current measurement
results are added as the first dataset to the new report.
The R&S ESW saves the data selected with HCOPy:TREPort:ITEM:SELect
on page 610.
Example:
HCOP:TREP:NEW
Creates a test report.
Usage: Event
Manual operation: See "Adding and removing datasets" on page 299
HCOPy:TREPort:PAGesize <Size>
This command selects the size of the test report document.
Parameters:
<Size> A4
Document pages have an A4 size.
US
Document pages have a US letter size.
*RST: A4
Example:
HCOP:TREP:PAG A4
Selects the A4 size for the document.
Manual operation: See "General properties of the test report document"
on page 294
HCOPy:TREPort:PAGecount:STATe <State>
This command includes or excludes page number from the test report.
Parameters:
<State> ON | OFF
*RST: ON
Example:
HCOP:TREP:PAG:STAT OFF
Removes page numbers from the test report.
Data Management