Rohde & Schwarz ESW44 - The Function Keys

Instrument Tour
R&S
®
ESW
51User Manual 1177.6298.02 ─ 08
5.1.12 The Function Keys
Function keys provide access to the most common measurement settings and func-
tions.
Refer to the user manual for an extensive description of the measurement settings and
functions.
Provides functionality to define frequency parameters, for example:
●
the receiver or center frequency
●
the frequency offset
Provides functionality to configure the frequency span.
Provides functionality to configure amplitude or level characteristics, for example:
●
the attenuation
●
the input impedance
●
the scale of the level axis
●
the preamplifier
Provides functionality to automatically define various parameters like the level or fre-
quency.
Provides functionality to define various filter bandwidths.
Provides functionality to configure the measurement, for example:
●
the measurement mode (single or continuous measurements)
●
the number of measurement points
●
the measurement time
Provides functionality to configure data acquisition and analyze measured data, for
example:
●
the trace mode
●
the detector
Provides functionality to configure triggered and gated measurements.
Provides functionality to activate and position absolute and relative markers (markers
and delta markers).
Performs a peak search for active markers.
If no marker is active, marker 1 is activated and the peak search is performed for it.
Spectrum application only: Provides additional analysis functions of the measure-
ment markers, for example:
●
the frequency counter
●
the noise measurement
●
the phase noise measurement
●
the AM/FM audio demodulator
Provides functionality to position and control markers, for example:
●
to configure the marker search
●
to configure the peak excursion
The Front Panel