Setting Up the Instrument
R&S
®
ETL
13Getting Started 2118.4130.02 ─ 04
4 Setting Up the Instrument
Risk of injuries
To avoid injuries to yourself or others, always follow the instructions provided in the fol-
lowing chapters. Furthermore, observe the general safety instructions delivered with
the R&S ETL.
4.1 Unpacking the Instrument
The R&S ETL is shipped together with its mandatory accessories in a cardboard box.
4.1.1 Inspecting for Shipping Damage
Check the following. If anything is damaged, immediately notify the carrier.
1. Check the shipping container and cushioning material for damage.
2. Unpack the cardboard box, see Chapter 4.1.2, "Unpacking the Cardboard Box",
on page 13.
3. Check the housing and handle for visible damages or loose parts.
4.1.2 Unpacking the Cardboard Box
Proceed as follows:
1. Open the cardboard box.
2. Remove the accessories packed into the box.
3. Take the R&S ETL out of the packaging.
4. Remove the shock protectors attached to the R&S ETL.
Retain the original packing material. If the R&S ETL needs to be transported or ship-
ped later, you can use the material to prevent control elements and connectors from
being damaged. Rohde & Schwarz accepts claims of warranty only if the R&S ETL is
shipped with sufficient packaging.
Unpacking the Instrument
To Next Page
Loading...
