Installed Software
R&S
®
ETL
52Getting Started 2118.4130.02 ─ 04
10 Installed Software
The firmware and the operating system are already installed on the R&S ETL.
Further information
●
Performing a firmware update:
See the release notes.
●
Installing software options:
See the document delivered with the option key.
10.1 Operating System
The R&S ETL has a Windows Embedded operating system with one of the following
versions:
●
Windows 8
The serial number of the R&S ETL is ≥ 205 000 or an upgrade kit (R&S ETL-
U80/U81/U82) is installed.
●
Windows XP
The serial number of the R&S ETL is < 205 000. No upgrade kit is installed.
When the R&S ETL is delivered, the operating system is configured for optimum oper-
ation. Changes to the system settings are required only if you install peripherals such
as a keyboard and printer, or if you configure the network and the settings do not con-
form to the default settings.
Risk of causing instrument unusability
To prevent malfunctions and to avoid instrument repair, only install service packs
approved by Rohde & Schwarz. In particular, do not use service packs for other Win-
dows editions.
Only install and execute programs tested by Rohde & Schwarz with regard to their
compatibility with the R&S ETL software. The tested program packages are listed in
Chapter 10.2, "Additional Software", on page 54.
10.1.1 Logon
Windows requires that you identify yourself by entering a user name and password in a
logon window.
Operating System
To Next Page
Loading...
