Trying Out the Instrument
R&S
®
FPL1000
60Getting Started 1323.1602.02 ─ 07
3. Double-tap the spectrum window to maximize it, as we currently do not need
the spectrogram display.
4. Press the [Run Single] key on the front panel to perform a single sweep so we
have a fixed trace to set a marker on.
5. Press the [Mkr] key on the front panel to display the "Marker" menu.
Marker 1 is activated and automatically set to the maximum of trace 1. The
marker position and value is indicated in the diagram area as M1[1].
6. Now you can move the marker by tapping and dragging it to a different posi-
tion. The current position is indicated by a dotted blue line. Notice how the
position and value change in the marker area of the diagram.
Setting and Moving a Marker
To Next Page
Loading...
