R&S FSH-Z2 Spare Part Replacement
1145.5767.02 3.5 E-1
Replacing the Top/Bottom covers
Housing parts:
01: Top cover
02: Bottom cover
Notes: When replacing the bottom cover, the existing type plate must be placed on the new bottom
cover, or the old series number must be written on the new type plate.
½ Open the instrument as described earlier.
½ Replace the specific cover.
½ Close the instrument as described earlier.
Fig. 3-5 Location of the power cable assy and the coax cable assy in the bottom cover.
To Next Page
Loading...
