R&S FSH Digital Modulation Analyzer
Measurements on TD-SCDMA Signals
Operating Manual 1173.6275.12 - 30 298
9.7.2.1 Header Table and Diagram Header
The header table and the diagram header contain an assortment of settings already
discussed in the section about the result summary. For more information see "The
Result Summary" on page 293.
In addition, they contain the following information.
Code / SF
Shows the currently selected code and its spreading factor.
The first value is the code number, the second value is the spreading factor.
The spreading factor for the codes is variable in the range between 0 and 16.
Mod(ulation) Type
Shows the modulation type of the currently selected code.
For more information see "Selecting a Code Channel" on page 307.
Symbol EVM
Shows the EVM of the currently selected code.
For more information see "Selecting a Code Channel" on page 307.
Code Power
Shows the power level of the currently selected code.
For more information see "Selecting a Code Channel" on page 307.
Slot Number
Shows the number of the time slot that the code domain is analyzed for.
For more information see "Selecting a Time Slot" on page 306.
RF Channel Power
Shows the total power of the signal.
For more information see "Global Results" on page 294.
Composite EVM
Shows the composite Error Vector Magnitude (EVM) in %.
For more information see "Global Results" on page 294.
To Next Page
Loading...
