R&S FSH Digital Modulation Analyzer
Measurements on LTE Signals
Operating Manual 1173.6275.12 - 30 326
9.8.6.10 Synchronizing to a Base Station Using a GPS Receiver
If you use a GPS receiver while performing measurements on a base station, you can
synchronize the sweep via the GPS receiver.
► Press the SWEEP key.
► Press the "Trigger" softkey.
► Select GPS Sync menu item.
The R&S FSH now synchronizes the sweep to the signal using the GPS receiver.
For more information about the external trigger that is also available see "Working with
Trigger Functionality" on page .
To Next Page
Loading...
