Rohde & Schwarz FSH3 - Page 101

R&S FSH3 Using the Markers
Deactivating markers or delta markers one at a time:
¾ Press the MARKER or DELTA softkey.
The activated markers or delta markers are highlighted
in green.
¾ Using the rotary knob or the cursor keys, select an
activated marker or delta marker, i.e. place the red
cursor on the appropriate item.
The value entry box for the selected marker appears.
¾ Press the MARKER or DELTA softkey to
deactivate the selected marker or delta marker.
Note: If marker 1 (M1) is deactivated, the R&S FSH3 also deactivates all delta markers, because
they use marker 1 as a reference.
Deactivating all markers or delta markers:
¾ Press the MARKER or DELTA softkey.
¾ Using the rotary knob or the cursor keys, select
ALL MARKERS OFF or DELTA OFF.
¾ Press the ENTER key or the MARKER or DELTA
softkey to deactivate all markers or delta markers.
Note: When the markers are deactivated, the R&S FSH3 also deactivates all delta markers,
because they use marker 1 as a reference.
Exiting the multimarker mode:
¾ Press the MARKER key.
¾ Press the MARKER MODE softkey.
¾ Using the cursor keys or the rotary knob, select
NORMAL, NOISE or FREQ COUNT from the
submenu.
¾ Confirm your selection with the ENTER key or the
MARKER MODE softkey.
The R&S FSH3 returns to the normal marker mode.
1145.5973.12 4.27 E-6