R&S FSH3 Saving and Loading Instrument Settings and Measurement Results
Loading measurement results
Previously saved measurement results and settings can be recalled with the R&S FSH3’s recall
function.
¾ Press the RECALL softkey.
The R&S FSH3 opens a list of all the data sets that
have been saved (DATASET LIST).
The red selection bar indicates the last data set to
have been saved.
Using the cursor keys, you can position the selection
bar at the top or bottom of the page. This means fast
scrolling if many data sets have been saved in the
R&S FSH3’s memory.
The displayed list of data sets can be printed out by
pressing the LIST->PRINTER softkey.
You can quit the menu by pressing the EXIT softkey.
The R&S FSH3 returns to its previous settings.
¾ Using the rotary knob or the cursor keys select a data set.
¾ Load the data set by pressing the RECALL softkey.
The R&S FSH3 displays the contents of the selected
data set as a graph on the screen but the settings are
not activated on the R&S FSH3. This provides an
opportunity to visually inspect the data set before its
settings are activated.
The name of the data set is displayed in the bottom
left-hand corner of the screen.
When this setting is activated, you can scroll through
the data sets stored by the R&S FSH3 with the cursor
keys or the rotary knob. This means that the results
and the associated settings can be viewed together.
The user can now
¾ transfer the data set with ACTIVATE and with this setting return to the associated R&S FSH3
measurement mode,
¾ print out the measurement and settings stored in the data set to a printer using PRINT,
¾ press EXIT to quit the setting again.
When you press the EXIT softkey, you return again to the display mode where all saved data sets are
listed (DATASET LIST). You can then select, load or delete data sets from this list.
1145.5973.12 4.87 E-6
To Next Page
Loading...
