R&S FSH3 Printing out Measurement Results
Printing out Measurement Results
An R&S FSH3 screenshot can be printed out on a printer. The printer type and the baud rate for the
serial connection can be selected in the setup menu using the GENERAL / PRINTER... softkey.
¾ Press the SAVE / PRINT key.
The R&S FSH3 opens the SAVE / PRINT menu and
the printout function offers to print out the current
screen to a printer.
Instrument settings can also be saved and data sets
loaded or deleted.
¾ The SCREEN->PRINTER softkey starts the screenshot printout on a printer.
The screenshot printout is black and white.
The print date and time and the
measurement date and time are output in
the two header lines.
The associated setup parameters for the
measurement in question are printed out
below the screenshot hardcopy.
1145.5973.12 4.89 E-6
To Next Page
Loading...
