Rohde & Schwarz FSP3 - Page 30

Measurement Equipment R&S FSP
1164.4556.82 1.2 E-1
Item Type of
equipment
Specifications recommended Equipment
recommended
Alternative
equipment
Use
5 Signal generator R&S FSP 07: 10 MHz to 7 GHz
R&S FSP 13: 10 MHz to 13.6 GHz
R&S FSP 30: 10 MHz to 30 GHz
R&S FSP 40: 1 MHz to 40 GHz
R&S SMP02
R&S SMP02
R&S SMP04
R&S SMP04
HP 63620 B
HP 63620 B
HP 83640 B
HP 83640 B
(Agilent)
Third order intercept
6 Power splitter
2-resistor design
R&S FSP 03: 1 MHz to 3 GHz
R&S FSP 07: 10 MHz to 7 GHz
R&S FSP 13: 10 MHz to 13.6 GHz
R&S FSP 30: 10 MHz to 30 GHz
R&S FSP 40: 10 MHz to 40 GHz
Level imbalance
1 MHz to 3 GHz  0.15 dB
3 GHz to 7 GHz  0.2 dB
7 GHz to 13.6 GHz  0.25 dB
13.6 GHz to 40 GHz  0.4 dB
HP 11667A
(Agilent)
HP 11667C
+ adapter to K
(Agilent)
Third order intercept
Frequency response
7
50  termination
R&S FSP 03: to 3 GHz
R&S FSP 07: to 7 GHz
R&S FSP 13: to 13.6 GHz
R&S FSP 30: to 30 GHz
R&S FSP 40: to 40 GHz
RNA
RNA
Wiltron 28S50
Wiltron 28K50
Wiltron 28K50
85138A
(Agilent)
Noise display
8 Power meter R&S NRVD HP 483A
(Agilent)
Frequency response
9 Power sensor 1 MHz to 3 GHz
RSS  0.8%
Meter noise  20 pW
R&S NRV-Z4 HP 8482 A
(Agilent)
Frequency response
10 Power sensor
RSS referenced to indic. power:
1 MHz to 1 GHz 1.5 %
1 GHz to 7 GHz 2 %
7 GHz to 13.6 GHz 3.5 %
13.6 GHz to 30 GHz  4 %
R&S FSP 03: 10 MHz to 3 GHz
R&S FSP 07: 10 MHz to 7 GHz
R&S FSP 13: 10 MHz to 13.6 GHz
R&S FSP 30: 10 MHz to 30 GHz
R&S FSP 40: 10 MHz to 40 GHz
R&S NRV-Z4
R&S NRV-Z2
R&S NRV-Z2
R&S NRV-Z55
R&S NRV-Z55
HP 8487 A
(Agilent)
Frequency response
11 Step attenuator Variable attenuation
0 dB to 100 dB, 1 dB steps
Attenuation accuracy
< 0.1 dB (f = 128 MHz)
R&S RSP 11713A with
8494G and
8496G
(Agilent)
Reference level switching
display linearity
RF attenuator
12 Fixed attenuator
(2 x)
Fixed attenuation 10 dB
R&S FSP 03: 10 MHz to 3 GHz
R&S FSP 07: 10 MHz to 7 GHz
R&S FSP 13: 10 MHz to 13.6 GHz
R&S FSP 30: 10 MHz to 30 GHz
R&S FSP 40: 10 MHz to 40 GHz
DNF
DNF
Wiltron
43KB-10
Wiltron
43KC-10
Wiltron
43KC-10
8490D-010
(Agilent)
Third order intercept
14 N cable Attenuation < 0.2 dB to 3 GHz TG output level
15 Spectrum
analyzer
Frequency range to 3 GHz R&S FSP 3 E4404B
ESA-E
(Agilent)
TG modulation
16 Arbitrary
waveform
generator
Frequency range to 10 MHz
2 sinusoidal signals with 90 deg.
phase difference
R&S ADS 33220A with
option 001
(Agilent)
(2 units)
TG modulation