Basic Measurement Examples
R&S
®
FSVA/FSV
127Quick Start Guide 1321.3066.02 ─ 06
7.5 Storing and Loading Instrument Settings
The R&S FSVA/FSV can store complete instrument settings together with instru-
ment configurations and measurement data in a settings file. The data is stored
on the built-in hard disk or - if selected - on a USB device (e.g. memory stick) or
on a network drive. The hard disk has the drive letter C:.
In the default state, the current settings are stored. This includes the settings of
the measurement functions, the activated limit lines and the active transducer fac-
tor.
7.5.1 Storing an Instrument Configuration (without Traces)
1. Press the SAVE/RCL key.
2. Press the "Save" softkey.
The dialog box for instrument configurations is displayed. The File Name
field is in edit mode and contains a suggestion for a new name.
3. To change the suggested name, enter a name for the settings file to be
stored.
Storing and Loading Instrument Settings
To Next Page
Loading...
