Front and Rear Panel View
R&S
®
FSVA/FSV
19Quick Start Guide 1321.3066.02 ─ 06
Function key Assigned functions
MKR FUNC
Provides additional analysis functions of the measurement mark-
ers:
●
Frequency counter (Sig Count)
●
Fixed reference point for relative measurement markers (Ref
Fixed)
●
Noise marker (Noise Meas)
●
Phase noise
●
n dB down function
●
AM/FM audio demodulation (with option R&S FSV-B3)
●
Peak list
MKR-> Used for search functions of the measurement markers (maxi-
mum/minimum of the trace).
Assigns the marker frequency to the center frequency, and the
marker level to the reference level.
Restricts the search area (Search Limits) and characterizes the
maximum points and minimum points (Peak Excursion).
Measurement functions
MEAS
Provides the measurement functions:
●
Measurement of multicarrier adjacent channel power (Ch
Power ACLR)
●
Carrier to noise spacing (C/N C/No)
●
Occupied bandwidth (OBW)
●
Spectrum emission mask measurement (Spectrum Emission
Mask)
●
Spurious emissions (Spurious Emissions)
●
Measurement of time domain power (Time Domain Power)
●
Signal statistics: amplitude probability distribution (APD) and
cumulative complementary distribution function (CCDF)
●
Third-order intercept point (TOI)
●
AM modulation depth (AM Mod Depth)
MEAS CONFIG Used to define measurement configuration.
LINES Configures display lines and limit lines.
INPUT/OUTPUT Displays softkeys for input/output functions.
Measurement start functions
RUN SINGLE Starts a single new measurement (Single Sweep Mode).
RUN CONT Starts a continuous measurement (Continuous Sweep Mode).
Function execution
UNDO Reverts last operation.
REDO Repeats previously reverted operation.
Front Panel View
To Next Page
Loading...
