Trying Out the Instrument
R&S
®
FSW
79Getting Started 1338.4102.02 ─ 08
7. Select "Adapt Hardware to Zoom (selected diagram)".
The span of the measurement is changed, and due to the automatic coupling
of the span to the sweep time, RBW and VBW, those values are also
changed. The number of sweep points is restored to the default 1001. The
range of the trace is the same as in the graphical zoom. However, due to the
smaller RBW filter, the peak is narrower.
6.9 Saving Settings
To restore the results of our measurements later, we will store the instrument set-
tings to a file.
To save the instrument settings to a file
1. Tap the "Save" icon in the toolbar.
Saving Settings
To Next Page
Loading...
