Rohde & Schwarz FSW Series - Page 155

Analysis
R&S
®
FSW-K7
155User Manual 1173.9240.02 ─ 17
Position....................................................................................................................... 155
Show Line................................................................................................................... 155
Position
Defines the position of the analysis line in the time domain. The position must lie within
the measurement time of the multistandard measurement.
Remote command:
CALCulate:MSRA:ALINe[:VALue] on page 337
CALCulate:RTMS:ALINe[:VALue] on page 339
Show Line
Hides or displays the analysis line in the time-based windows. By default, the line is
displayed.
Note: even if the analysis line display is off, the indication whether or not the currently
defined line position lies within the analysis interval of the active application remains in
the window title bars.
Remote command:
CALCulate:MSRA:ALINe:SHOW on page 337
CALCulate:RTMS:ALINe:SHOW on page 339
Analysis in MSRA/MSRT Mode