Rohde & Schwarz FSW Series - LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
284User Manual 1173.9240.02 ─ 17
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the LAYout:REPLace[:WINDow] command.
Parameters:
<WindowName> String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]? query.
<Direction> LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.
<WindowType> text value
Type of result display (evaluation method) you want to add.
See the table below for available parameter values.
Return values:
<NewWindowName> When adding a new window, the command returns its name (by
default the same as its number) as a result.
Example:
LAY:ADD? '1',LEFT,MTAB
Result:
'2'
Adds a new window named '2' with a marker table to the left of
window 1.
Example:
LAY:ADD? '1',BEL,'XTIM:AM:RELative[:TDOMain]'
Adds an AM Time Domain display below window 1.
Usage: Query only
Manual operation: See "AM Time Domain" on page 15
See "FM Time Domain" on page 16
See "PM Time Domain" on page 17
See "AM Spectrum" on page 18
See "FM Spectrum" on page 19
See "PM Spectrum" on page 20
See "RF Time Domain" on page 21
See "RF Spectrum" on page 22
See "Result Summary" on page 23
See "Marker Table" on page 24
See "Marker Peak List" on page 25
Configuring the Result Display