Rohde & Schwarz FSW Series - Page 309

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
309User Manual 1173.9240.02 ─ 17
CALCulate<n>:MARKer<m>:MINimum:NEXT................................................................... 310
CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 310
CALCulate<n>:MARKer<m>:MINimum:RIGHt...................................................................310
CALCulate<n>:MARKer<m>:MAXimum:LEFT
This command moves a marker to the next lower peak.
The search includes only measurement values to the left of the current marker posi-
tion.
Usage: Event
Manual operation: See "Search Mode for Next Peak" on page 140
CALCulate<n>:MARKer<m>:MAXimum:NEXT
This command moves a marker to the next lower peak.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
See "Search Next Peak" on page 141
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
This command moves a marker to the highest level.
If the marker is not yet active, the command first activates the marker.
Usage:
Event
Manual operation: See "Peak Search" on page 141
CALCulate<n>:MARKer<m>:MAXimum:RIGHt
This command moves a marker to the next lower peak.
The search includes only measurement values to the right of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
CALCulate<n>:MARKer<m>:MINimum:LEFT
This command moves a marker to the next minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
Usage:
Event
Manual operation: See "Search Mode for Next Peak" on page 140
Analyzing Results