Rohde & Schwarz FSW Series - Page 59

Configuration
R&S
®
FSW-K7
59User Manual 1173.9240.02 ─ 17
External Mixer State......................................................................................................59
RF Start / RF Stop.........................................................................................................59
Handover Freq.............................................................................................................. 60
Band..............................................................................................................................60
RF Overrange............................................................................................................... 60
Preset Band.................................................................................................................. 60
Mixer Type.................................................................................................................... 60
Mixer Settings (Harmonics Configuration).................................................................... 60
└ Harmonic Type................................................................................................61
└ Range 1/2....................................................................................................... 61
└ Harmonic Order.............................................................................................. 61
└ Conversion loss.............................................................................................. 61
External Mixer State
Activates or deactivates the external mixer for input. If activated, "ExtMix" is indicated
in the channel bar of the application, together with the used band (see "Band"
on page 60).
Remote command:
[SENSe:]MIXer[:STATe] on page 185
RF Start / RF Stop
Displays the start and stop frequency of the selected band (read-only).
The frequency range for the user-defined band is defined via the harmonics configura-
tion (see "Range 1/2" on page 61).
For details on available frequency ranges see table 11-2.
Remote command:
[SENSe:]MIXer:FREQuency:STARt? on page 187
[SENSe:]MIXer:FREQuency:STOP? on page 187
Input and Frontend Settings