Instrument Tour
R&S
®
FSW
58Getting Started 1338.4102.02 ─ 08
5.2.19 IF OUT 2 GHz / 5 GHz Connector
The female SMA connector is only available for instrument models
R&S FSW26/43/50/67/85. It can be used to provide intermediate frequency (IF)
output of approximately 2 GHz at a frequency of 2 GHz.
Output is activated in the software ([INPUT/OUTPUT] key).
For details, see the R&S FSW I/Q Analyzer and I/Q Input User Manual.
5.2.20 Labels on R&S FSW
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 10
●
Product and environment safety, see Table 5-4
●
Identification of the product, see Chapter 5.2.21, "Device ID", on page 58
Table 5-4: Labels regarding R&S
FSW and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see the prod-
uct user manual, chapter "Disposal".
5.2.21 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S FSW.
It consists of the device order number and a serial number.
Rear Panel View
To Next Page
Loading...
