Rohde & Schwarz FSW26 - Page 504

Common Analysis and Display Functions
R&S
®
FSW
504User Manual 1173.9411.02 ─ 19
"XY-Search"
Searches in all frames at all positions.
Remote command:
CALCulate<n>:MARKer<m>:SGRam|SPECtrogram:XY:MAXimum[:PEAK]
on page 945
CALCulate<n>:DELTamarker<m>:SGRam|SPECtrogram:XY:MAXimum[:PEAK]
on page 949
CALCulate<n>:MARKer<m>:SGRam|SPECtrogram:XY:MINimum[:PEAK]
on page 945
CALCulate<n>:DELTamarker<m>:SGRam|SPECtrogram:XY:MINimum[:PEAK]
on page 949
CALCulate<n>:MARKer<m>:SGRam|SPECtrogram:Y:MAXimum[:PEAK]
on page 946
CALCulate<n>:DELTamarker<m>:SGRam|SPECtrogram:Y:MAXimum[:PEAK]
on page 950
CALCulate<n>:MARKer<m>:SGRam|SPECtrogram:Y:MINimum[:PEAK]
on page 947
CALCulate<n>:DELTamarker<m>:SGRam|SPECtrogram:Y:MINimum[:PEAK]
on page 951
CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 938
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 940
CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 939
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 941
Marker Search Area
Defines which frames the search is performed in.
"Visible"
Only the visible frames are searched.
"Memory"
All frames stored in the memory are searched.
Remote command:
CALCulate<n>:MARKer:SGRam|SPECtrogram:SARea on page 945
CALCulate<n>:DELTamarker<m>:SGRam|SPECtrogram:SARea on page 949
Exclude LO
If activated, restricts the frequency range for the marker search functions.
"ON"
The minimum frequency included in the peak search range is ≥ 5 ×
resolution bandwidth (RBW).
Due to the interference by the first local oscillator to the first inter-
mediate frequency at the input mixer, the LO is represented as a sig-
nal at 0 Hz. To avoid the peak marker jumping to the LO signal at 0
Hz, this frequency is excluded from the peak search.
"OFF"
No restriction to the search range. The frequency 0 Hz is included in
the marker search functions.
Remote command:
CALCulate:MARKer:LOEXclude on page 934
Marker Usage