TriggerMXO 4 Series
150User Manual 1335.5337.02 ─ 07
Level
See "Level" on page 143.
Remote command:
TRIGger:EVENt<ev>:LEVel<n>[:VALue] on page 541
Polarity
Sets the polarity of a pulse, which is the direction of the first pulse slope.
"Positive"
Selects positive going pulses, the width is defined from the rising to
the falling slopes.
"Negative"
Selects negative going pulses, the width is defined from the falling to
the rising slopes.
"Either"
Selects both positive and negative going pulses.
Remote command:
TRIGger:EVENt<ev>:GLITch:POLarity on page 547
TRIGger:EVENt<ev>:RUNT:POLarity on page 550
Range
Selects how the time limit of the runt pulse is defined.
Remote command:
TRIGger:EVENt<ev>:GLITch:RANGe on page 547
Width
Sets the length of a glitch. The instrument triggers on pulses shorter or longer than this
value, depending on the value set with "Range".
Trigger types
To Next Page
Loading...
