Rohde & Schwarz MXO 4 Series - Page 168

TriggerMXO 4 Series
168User Manual 1335.5337.02 ─ 07
TRIGger:EVENt<ev>:PATTern:QUALify:DIGital:LOGic on page 564
TRIGger:EVENt<ev>:STATe:QUALify:DIGital:LOGic on page 562
7.4.12.3 Set state for state and pattern trigger of digital channels
Access: "Menu" > "Trigger" > "Setup" tab > "Type = Pattern" > "Set state"
Source: channel states
Set the state for each channel.
Remote command:
TRIGger:EVENt<ev>:PATTern:QUALify:DIGital:CHAN<n>:HLX on page 564
TRIGger:EVENt<ev>:STATe:QUALify:DIGital:CHAN<n>:HLX on page 563
Set all
Sets all channels to the selected state.
State Operator
Defines the logic combination of the channels and their states.
Trigger types