MeasurementsMXO 4 Series
240User Manual 1335.5337.02 ─ 07
Tracks with math functions
Figure 9-7: Tracks used in math functions
The example is set up as follows:
●
Waveform on channel 1
●
3 measurements on C1: positive duty cycle, period and positive pulse width
●
Enable track for each measurement: Track 1 (positive duty cycle), Track 2 (period),
Track 3 (positive pulse width)
●
Math1 = Trk1 * Trk2
●
Math2 = Math1 / 100
Expected values: Period * Pos. duty cycle / 100 = Positive pulse width, i.e. Math2 =
Trk3
●
Math3 = Math2 - Trk3
Expected values = 0
Automatic measurements
To Next Page
Loading...
