ApplicationsMXO 4 Series
263User Manual 1335.5337.02 ─ 07
Sort
Sorts the points in the amplitude table by frequency, starting with the lowest frequency.
Remote command:
FRANalysis:AMPLitude:PROFile:SORT on page 667
Delete
If enabled a delete icon appears next to each point in the amplitude profile table. You
can tap on it to delete the amplitude point.
Remote command:
FRANalysis:AMPLitude:PROFile:POINt<m>:REMove on page 666
11.1.3.3 Advanced
Access: [Apps] > "General" > "FRA" > "Setup" > "Advanced".
Frequency response analysis (option R&S MXO4-K36)
To Next Page
Loading...
