ApplicationsMXO 4 Series
266User Manual 1335.5337.02 ─ 07
11.1.3.5 Scale
Access: [Apps] > "General" > "FRA" > "Scale".
Figure 11-2: Scale dialog for Mode = Gain/Phase
Vertical scale
Sets the scale of the y-axis in the function diagram.
Vertical offset
Sets a voltage offset to adjust the vertical position on the screen.
11.1.3.6 Calibration
Calibration can be used to compensate the electrical parameter of probes, cables, con-
nector or fixtures.
Access: [Apps] > "General" > "FRA" > "Calibration".
Frequency response analysis (option R&S MXO4-K36)
To Next Page
Loading...
