Rohde & Schwarz MXO 4 Series - Calibration Certificate; Release Notes, Open Source Acknowledgment; Application Notes, Application Cards, Videos; Options Described in this Document

PrefaceMXO 4 Series
27User Manual 1335.5337.02 ─ 07
2.2.3 Calibration certificate
The document is available on https://gloris.rohde-schwarz.com/calcert. You need the
device ID of your instrument, which you can find on a label on the rear panel.
2.2.4 Release notes, open source acknowledgment
The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation. The open source acknowledg-
ment document provides verbatim license texts of the used open source software. It
can also be read directly on the instrument.
www.rohde-schwarz.com/firmware/mxo4
2.2.5 Application notes, application cards, videos
These documents deal with special applications or background information on particu-
lar topics.
R&S®MXO 4 - Mediacenter
2.3 Options described in this document
In addition to the base unit, the following options are described in this documentation:
Type Designation Order No.
R&S MXO4-B1 MSO 1335.4130.02
R&S MXO4-B6 Waveform and pattern generator 1335.4147.02
R&S MXO4-K31 Power analysis 1335.5566.02
R&S MXO4-K36 Frequency response analysis 1335.5572.02
R&S MXO4-K510 Triggering and decoding low
speed serial buses:
I2C, SPI, UART/RS-232/RS-422/
RS-485
1335.5195.02
R&S MXO4-K520 Triggering and decoding automo-
tive protocols:
LIN, CAN, CAN FD, CAN XL
1335.5550.02
R&S MXO4-K550 Decoding MIPI low speed proto-
cols:
SPMI
1335.5214.02
R&S MXO4-K560 Decoding automotive Ethernet:
10BASE-T1S
1335.5943.02
Options described in this document