ApplicationsMXO 4 Series
273User Manual 1335.5337.02 ─ 07
11.2.2 Power measurements
11.2.2.1 Power analysis settings
In the "Analysis" you can enable the power analysis and access the dialog to select the
power analysis measurements.
You can add up to 3 power analysis measurements. You can also add several instan-
ces of the same measurement.
Also you can access the settings dialogs for all enabled power analysis measure-
ments.
Add
Opens a dialog to select the power analysis measurements.
Available are power quality and power harmonics measurements.
Power analysis (option R&S MXO4-K31)
To Next Page
Loading...
