Data and file managementMXO 4 Series
302User Manual 1335.5337.02 ─ 07
Table 12-1: Header file properties in CSV files
Value Description
Model Model of the instrument
SerialNumber Serial number of the instrument
SourceType Type of the exported waveform
SignalSource Source of the exported waveform
Resolution Time between two samples
Resolution = 1 / Sample Rate
RecordLength Number of samples in a waveform record of one acquisition
HWRecordLength Equivalent to the RecordLength
HorizontalPosition Horizontal position of the waveform in divisions
TraceArithmetics Waveform arithmetic of the waveform: off, envelope, or average
BaseUnit Base unit of a mathematic waveform, for example, linear unit
BaseUnitRelative Base unit, if a relative unit (e.g. dB) is enabled
Impedance Input impedance, used for power calculation
XStart Horizontal start value of the waveform (time or frequency), as defined in
the export settings
XStop Horizontal stop value of the waveform (time or frequency), as defined in
the export settings
TimebaseScale Horizontal scale in seconds per division
ReferencePoint Position of the zero point in % of the screen
VerticalPosition Vertical position of the waveform in divisions
VerticalScale Vertical scale of the waveform
VerticalOffset Vertical offset of the waveform in Volts, or other unit
BaseYStart Vertical start value of the waveform
BaseYStop Vertical stop value of the waveform
ViewUnit User-selected unit of a mathematic waveform, for example, logarithmic
unit for a spectrum. The value is only valid if the exported waveform is a
math waveform.
ViewUnitRelative Indication of a relative unit. It is true if the math waveform has the ViewU-
nit "dB", for example. The value is only valid if the exported waveform is
a math waveform.
ViewReferenceLevel Reference level for a relative unit. The value is only valid if the exported
waveform is a math waveform, and the unit is relative.
NumericFormat Number format of bus values and digital channel data (bit pattern format)
EnhancementMode Method to increase the sample rate if the required sample rate is higher
than the ADC sample rate.
InterpolationMode Interpolation method. The value is relevant when the enhancement mode
is interpolated time.
Save and recall waveform data
To Next Page
Loading...
