Rohde & Schwarz MXO 4 Series - CAN Filter

Protocol analysisMXO 4 Series
375User Manual 1335.5337.02 ─ 07
11,1BCh,TP_Console
11,333h,ABSdata
11,313h,Door_Left
11,314h,Door_Right
29,01A54321h,Throttle
29,13A00FA2h,LightState
29,0630ABCDh,Engine_Status
29,03B1C002h,Airbag_Status
29,01234ABCh,NM_Gateway
# ----------------------------------------------------------------------------
13.5.2 CAN filter
Access: [Apps] key > "Protocol" tab > "CAN" > "Filter" tab
In the "Filter" tab, you can define the settings to display only the frames that match the
selected filter conditions.
Check all, Clear, Invert, Reset
The following settings help you select the frames and errors you want to filter for. Only
the frames and error types that match the selected filter conditions are displayed.
"Check all"
Enables the filter for all available frames and error types.
"Clear"
Disables the filter for all available frames and error types.
CAN (option R&S MXO4-K520)