Rohde & Schwarz MXO 4 Series - Page 402

Protocol analysisMXO 4 Series
402User Manual 1335.5337.02 ─ 07
The color-coding of the various protocol sections and errors simplifies the interpretation
of the visual display. The decode information condenses or expands, depending on the
horizontal scale. Various data formats are available to show the result values.
Table 13-9: Content of the Decode results table
Column Description
Index Index of the decoded frame
State Overall state of the frame
Start Time of frame start
Identifier Identifier value
PID Protected identifier
Checksum Checksum value
Values Value of the data bytes. The data format is selected below the table.
Bit rate Value of the bit rate
Table 13-10: Content of the Details frame table
Column Description
Label State of the field
Value Value of the field
Data format
You can select various data formats for the values displayed in the decode table and in
the combs of the decoded signal.
Remote command:
●
SBUS<sb>:FORMat on page 704
Export of decode results
1. In the protocol "Shortcuts" tab, press "Export results".
LIN (option R&S
MXO4-K520)