Protocol analysisMXO 4 Series
421User Manual 1335.5337.02 ─ 07
2. Select the tab of the bus that you want to set up, for example "SB1".
3. Tap the "Protocol type" button. Select the protocol: "10BASE-T1S".
4. Tap on "State" to enable the decoding.
A 10Base-T1S shortcut appears at the bottom left of the screen. Tap the shortcut
for a quick access to the "10Base -T1S" dialog settings.
10BASE-T1S (option R&S MXO4-K560)
To Next Page
Loading...
