Mixed signal option (MSO, R&S MXO4-B1)MXO 4 Series
428User Manual 1335.5337.02 ─ 07
D0-D15
Sets an individual delay for each digital channel to time-align it with other digital chan-
nels.
The skew value compensates delays that are known from the circuit specifics or
caused by the different length of cables. The skew between the probe boxes of the dig-
ital channels and the probe connectors of the analog channels is automatically aligned
by the instrument.
Remote command:
PBUS<pb>:BIT<n>:SKEW on page 847
Skew
Sets a general delay for all digital channels.
Remote command:
PBUS<pb>:SKEW on page 852
14.2 Display
Each logic group is shown in a separate diagram, and the diagrams can be minimized
and arranged as usual.
Display
To Next Page
Loading...
