Waveform generator (option R&S MXO4-B6)MXO 4 Series
430User Manual 1335.5337.02 ─ 07
15 Waveform generator (option R&S MXO4-
B6)
The MXO 4 includes a two-channel 100 MHz waveform generator which can generate
a wide range of waveform and modulation types.
With each of the waveform generators, one can output simple functions, modulated
sine waveform, arbitrary waveforms and sweep waveforms. It is possible to couple and
synchronize the settings of the waveform generators.
The instrument preset does not affect the generator settings. Each generator has its
own preset ("Default setup"). When the instrument is shut down, the waveform genera-
tor settings are stored. At instrument start, these settings are restored but the genera-
tors are switched off. When a saveset of instrument settings is recalled, generators are
also switched off but the generator settings remain unchanged.
15.1 Setup of the waveform generator
Access: "Gen" signal activator > "Gen"1 or "Gen"2 > "Setup" tab.
15.1.1 General settings
The "Setup" tab provides general settings like enabling the waveform generator, and
setting that depend on the selected function type.
Setup of the waveform generator
To Next Page
Loading...
