Waveform generator (option R&S MXO4-B6)MXO 4 Series
436User Manual 1335.5337.02 ─ 07
"Arbitrary"
Generates an arbitrary waveform, which is copied from an existing
waveform, or loaded from file. See Chapter 15.1.4, "Arbitrary wave-
forms", on page 442.
Remote command:
WGENerator<wg>:FUNCtion[:SELect] on page 858
Frequency
Sets the frequency of the waveform.
The available frequency range depends on the selected "Function type", see Fre-
quency range of the function generator waveforms.
Table 15-1: Frequency range of the function generator waveforms
"Function type" Min frequency Max frequency
"Sine" 0.001 Hz 100 MHz
"Square" 0.001 Hz 30 MHz
"Ramp" 0.001 Hz 1 MHz
"DC" - -
"Pulse" 0.001 Hz 30 MHz
"Cardinal sine" 0.001 Hz 5 MHz
"Cardiac" 0.001 Hz 1 MHz
"Gauss" 0.001 Hz 25 MHz
"Lorentz" 0.001 Hz 10 MHz
"Exp.rise" 0.001 Hz 10 MHz
"Ep. fall" 0.001 Hz 10 MHz
Remote command:
WGENerator<wg>:FREQuency on page 857
Amplitude
Sets the amplitude of the waveform.
Setup of the waveform generator
To Next Page
Loading...
