Rohde & Schwarz MXO 4 Series - Network Operation and Remote Control; Connecting the Instrument to the Network (LAN)

Network operation and remote controlMXO 4 Series
451User Manual 1335.5337.02 ─ 07
16 Network operation and remote control
The operating system is the basis of the instrument's firmware, it provides basic func-
tions such as logon, password protection, virus protection, and connection to a net-
work.
In addition to working with the MXO 4 directly, using the touchscreen and the keys, you
can also operate the instrument from a remote PC. Various methods of remote opera-
tion and control in a LAN network are supported:
●
Using the web interface
●
Using a VNC client
●
Remote control with SCPI commands
The following descriptions provide information required for operating the MXO 4
remotely. Definitions specified in the SCPI standard are not provided.
For basic knowledge on remote control operation and additional information, see the
following documents, available on the Rohde & Schwarz website:
●
Remote control via SCPI
● Connecting the instrument to the network (LAN).................................................. 451
● Web interface........................................................................................................453
● Remote operation with VNC client........................................................................ 459
● Remote control......................................................................................................459
● Remote control - status reporting system............................................................. 462
16.1 Connecting the instrument to the network (LAN)
Network environment
Before connecting the product to a LAN, consider the following:
●
Install the latest firmware to reduce security risks.
●
For internet or remote access, use secured connections if applicable.
●
Ensure that the network settings comply with the security policies of your company.
Contact your local system administrator or IT department before connecting your
product to your company LAN.
●
When connected to the LAN, the product may potentially be accessed from the
internet, which may be a security risk. For example, attackers might misuse or
damage the product.
Connecting the instrument to the network (LAN)