Network operation and remote controlMXO 4 Series
462User Manual 1335.5337.02 ─ 07
● Use the SYSTem:DISPlay:UPDate OFF command.
16.4.2.3 Returning to manual operation
The instrument switches back to manual operation when the remote connection is
closed. Besides, you can return to manual operation manually or via remote control.
► To return to manual operation:
● Tap the "Local" button in the upper left corner of the touchscreen.
● VXI-11 protocol: Use >L interface message.
16.5 Remote control - status reporting system
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. Both can be queried via STATus... commands.
16.5.1 Hierarchy of status registers
As shown in the following figure, the status information is of hierarchical structure.
Remote control - status reporting system
To Next Page
Loading...
