Rohde & Schwarz MXO 4 Series - Page 516

Remote control commandsMXO 4 Series
516User Manual 1335.5337.02 ─ 07
ACQuire:POINts:MAXimum.............................................................................................518
ACQuire:POINts:MODE..................................................................................................518
ACQuire:RESolution.......................................................................................................518
ACQuire:SRATe[:VALue].................................................................................................519
ACQuire:SRATe:MINimum.............................................................................................. 519
ACQuire:SRATe:MODE.................................................................................................. 519
ACQuire:SRReal............................................................................................................520
ACQuire:TYPE.............................................................................................................. 520
ACQuire:AVAilable?
Number of acquisitions that is saved in the memory and available for history viewing. It
is also the number of acquisitions in a fast segmentation acquisition series.
Return values:
<AcquisitionCount> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
Manual operation: See "Available acqs" on page 196
ACQuire:AVERage?
Returns the current number of acquired waveforms that contribute to the average.
Return values:
<CurrAverageCount> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
Manual operation: See "Current Average count" on page 114
ACQuire:COUNt <MaxAcqCnt>
Sets the acquisition and average count, which has a double effect:
●
It sets the number of waveforms acquired with RUNSingle.
●
It defines the number of waveforms used to calculate the average waveform.
Parameters:
<MaxAcqCnt> Range: 1 to 16777215
Increment: 1
*RST: 1
Usage: Asynchronous command
Manual operation: See "N-single/Avg count" on page 113
Acquisition and setup