Rohde & Schwarz MXO 4 Series - Page 529

Remote control commandsMXO 4 Series
529User Manual 1335.5337.02 ─ 07
PROBe<ch>:PMETer:RESults:COMMon?
Returns the R&S ProbeMeter measurement result of differential active R&S probes:
the common mode voltage, which is the mean voltage between the signal sockets and
the ground socket.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<Result> Range: -1E+26 to 1E+26
Increment: 0.001
*RST: 0
Default unit: V
Usage: Query only
Asynchronous command
Manual operation: See "ProbeMeter" on page 130
PROBe<ch>:PMETer:RESults:DIFFerential?
Returns the R&S ProbeMeter measurement result of differential active
Rohde & Schwarz probes, the differential voltage - the voltage between the positive
and negative signal sockets.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<Result> Range: -1E+26 to 1E+26
Increment: 0.001
*RST: 0
Default unit: V
Usage: Query only
Asynchronous command
Manual operation: See "ProbeMeter" on page 130
PROBe<ch>:PMETer:RESults:NEGative?
Returns the R&S ProbeMeter measurement result of differential active R&S probes,
the voltage that is measured between the negative signal socket and the ground.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<Result> Range: -1E+26 to 1E+26
Increment: 0.001
*RST: 0
Default unit: V
Acquisition and setup