Rohde & Schwarz MXO 4 Series - Page 611

Remote control commandsMXO 4 Series
611User Manual 1335.5337.02 ─ 07
Parameters:
<medium> MMEM | CLIPBOARD
MMEM: saves image to a file.
CLIPBOARD: directs the image to the clipboard.
*RST: MMEM
Usage: Asynchronous command
Manual operation: See "Directory" on page 309
MMEMory:NAME <FileName>
Defines the filename for a screenshot that is stored to a file.
Parameters:
<FileName> String parameter specifying path and filename of the screenshot.
Example: See Chapter 17.4.2, "Saving screenshots to file", on page 478.
Usage: SCPI confirmed
Asynchronous command
HCOPy:DEVice<m>:LANGuage <FileFormat>
Defines the file format for output of the screenshot to file.
To set the output to file, use HCOPy:DESTination<m> with parameter 'MMEM'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<FileFormat> PNG | JPG
*RST: PNG
Usage: Asynchronous command
HCOPy:DEVice<m>:INVerse <InverseColor>
Inverts the colors of the output, i.e. a dark waveform is shown on a white background.
See also HCOPy:WBKG and White background.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<InverseColor> ON | OFF
*RST: OFF
Usage: Asynchronous command
Data management