Rohde & Schwarz MXO 4 Series - Page 648

Remote control commandsMXO 4 Series
648User Manual 1335.5337.02 ─ 07
CALCulate:SPECtrum<sp>:FREQuency:SPAN <Span>
The span is specified in Hertz and defines the width of the displayed frequency range,
which is (Center - Span/2) to (Center + Span/2). The position of the span is defined
using the "Center" setting.
Suffix:
<sp>
.
1
Parameters:
<Span> Range: 0 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "[Scale]" on page 41
CALCulate:SPECtrum<sp>:FREQuency:STARt
<Start>
Defines the start frequency of the displayed frequency span.
Suffix:
<sp>
.
1
Parameters:
<Start> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "Start" on page 248
CALCulate:SPECtrum<sp>:FREQuency:STOP <Stop>
Sets the stop frequency of the displayed frequency span.
Suffix:
<sp>
.
1
Parameters:
<Stop> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "Stop" on page 248
Spectrum analysis