Rohde & Schwarz MXO 4 Series - Page 669

Remote control commandsMXO 4 Series
669User Manual 1335.5337.02 ─ 07
FRANalysis:PHASe:DATA?.............................................................................................671
FRANalysis:FREQuency:DATA?......................................................................................671
FRANalysis:GAIN:DATA?................................................................................................671
FRANalysis:PHASe:ENABle <State>
Enables the phase waveform for the frequency response analysis.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
FRANalysis:PHASe:OFFSet
<VerticalOffset>
Sets a vertical offset of the phase waveform.
Parameters:
<VerticalOffset> Range: -10000 to 10000
Increment: 1
*RST: 0
Default unit: °
Usage: Asynchronous command
FRANalysis:PHASe:SCALe <VerticalScale>
Sets the vertical scale for the phase waveform.
Parameters:
<VerticalScale> Range: 1 to 180
Increment: 1
*RST: 36
Default unit: °/div
Usage: Asynchronous command
FRANalysis:GAIN:ENABle <State>
Enables the gain waveform for the frequency response analysis.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
FRANalysis:GAIN:OFFSet <VerticalOffset>
Sets a vertical offset of the gain waveform.
Applications