Rohde & Schwarz MXO 4 Series - Page 706

Remote control commandsMXO 4 Series
706User Manual 1335.5337.02 ─ 07
Usage: Asynchronous command
Manual operation: See "Include details" on page 319
SBUS<sb>:EXPResult:SAVE <FileName>
Saves the selected results to the indicated file.
Suffix:
<sb>
.
1...4, index of the serial bus
Setting parameters:
<FileName>
Usage: Setting only
Asynchronous command
Manual operation: See "Save as" on page 319
SBUS<sb>:EXPResult:TIME
<IncludeTiming>
If enabled, includes the frame timing in the export result file.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<IncludeTiming> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Include timing" on page 319
SBUS<sb>:EXPResult:EXTension <FileType>
Selects the file format.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<FileType> HTML | CSV | XML | PY
*RST: HTML
Usage: Asynchronous command
Manual operation: See "File type" on page 319
SBUS<sb>:EXPResult:PATH <Path>
Sets the path where the protocol export files are stored. On the instrument, the default
path is /home/storage/userData/Protocol. You can create subfolders in this
folder.
Protocols