Rohde & Schwarz MXO 4 Series - Page 714

Remote control commandsMXO 4 Series
714User Manual 1335.5337.02 ─ 07
SBUS<sb>:SPI:FILTer:ENABle........................................................................................ 715
SBUS<sb>:SPI:FILTer:BIT.............................................................................................. 715
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:BIT................................................................ 715
SBUS<sb>:SPI:FILTer:DMAX.......................................................................................... 716
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DMAX............................................................ 716
SBUS<sb>:SPI:FILTer:DMIN........................................................................................... 716
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DMIN............................................................. 716
SBUS<sb>:SPI:FILTer:DOPerator....................................................................................716
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DOPerator......................................................716
SBUS<sb>:SPI:FILTer:ERENable.................................................................................... 717
SBUS<sb>:SPI:FILTer:ERRor<n>:ENABle........................................................................717
SBUS<sb>:SPI:FILTer:FIENable......................................................................................717
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:ENABle.......................................................... 717
SBUS<sb>:SPI:FILTer:FRENable.................................................................................... 717
SBUS<sb>:SPI:FILTer:FRAMe<fr>:ENABle...................................................................... 717
SBUS<sb>:SPI:FILTer:IMAX........................................................................................... 718
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:IMAX............................................................. 718
SBUS<sb>:SPI:FILTer:IMIN.............................................................................................718
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:IMIN.............................................................. 718
SBUS<sb>:SPI:FILTer:IOPerator..................................................................................... 718
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:IOPerator....................................................... 718
SBUS<sb>:SPI:FILTer:CHKall
Enables the filter for all available frames and error types.
Suffix:
<sb>
.
1...4, index of the serial bus
Usage: Setting only
Asynchronous command
Manual operation: See "Check all, Clear, Invert, Reset" on page 326
SBUS<sb>:SPI:FILTer:CLR
Disables the filter for all available frames and error types.
Suffix:
<sb>
.
1...4, index of the serial bus
Usage: Setting only
Asynchronous command
Manual operation: See "Check all, Clear, Invert, Reset" on page 326
SBUS<sb>:SPI:FILTer:INVert
Inverts the current state of the frame and error types: all frames and error types that
were enabled are disabled and vice versa.
Protocols