Operating the instrumentMXO 4 Series
72User Manual 1335.5337.02 ─ 07
Progress information
If an acquisition, operation or process takes more time until results are displayed, a
progress bar or symbol indicates that a process is running.
The progress of saving operations and update or creation of a reference waveform is
shown in a progress bar. You can cancel the process. A notification informs about the
result.
Figure 4-8: Progress bar for saving waveform data
The progress of running acquisitions is shown in the acquisition label. A circle indicates
the state of the current, incomplete acquisition. Progress in roll mode, average mode
and single acquisition with N > 1 is indicated by a progress bar and counter.
Figure 4-9: Progress of incomplete long acquisition in average mode, Run Single = 5, first acquisition
is finished
4.13 Getting user assistance
If you need information on the instrument's functionality, you can use the instrument
help. It provides contextual information on a setting or dialog. If the help window is
open, you can browse and search for further information using links, table of contents,
and search.
4.13.1 Displaying help
To display the context help
1. Enable the "Help" icon on the toolbar.
2. Tap the parameter for which you need information.
The "Help" window opens and displays the comprehensive description and the cor-
responding remote command. You can browse the help for further information.
Getting user assistance
To Next Page
Loading...
