Rohde & Schwarz MXO 4 Series - Page 741

Remote control commandsMXO 4 Series
741User Manual 1335.5337.02 ─ 07
Return values:
<DeviceAddress> Range: 0 to 1023
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
SBUS<sb>:I2C:FRAMe<fr>:AMODe?
Returns the address length.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<AddressType> BIT7 | BIT7RW | BIT7_RW | BIT10 | AUTO | ANY
*RST: BIT7
Usage: Query only
Asynchronous command
SBUS<sb>:I2C:FRAMe<fr>:ASTart?
Returns the start time of the address for the indicated frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<AddressStart> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
SBUS<sb>:I2C:FRAMe<fr>:BCOunt?
Returns the number of bytes in the specified frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<Count>
Protocols