Rohde & Schwarz MXO 4 Series - UART; RS-232 (Option R&S MXO4-K510)

Remote control commandsMXO 4 Series
746User Manual 1335.5337.02 ─ 07
Return values:
<FrameStop> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
SBUS<sb>:I2C:FRAMe<fr>:SYMBol?
Returns the symbolic label of the specified frame if the label list is enabled.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<Translation> String with symbolic name of the address
Usage: Query only
Asynchronous command
17.16.4 UART / RS-232 (option R&S MXO4-K510)
Before MXO 4 can accept the specific bus commands, make sure that:
●
The decoding of the specified bus is enabled with SBUS<sb>[:STATe].
●
The bus is set to the correct type with SBUS<sb>:TYPE.
● Configuration.........................................................................................................746
● Trigger...................................................................................................................752
● Filter...................................................................................................................... 754
● Decode results...................................................................................................... 759
17.16.4.1 Configuration
SBUS<sb>:UART:BITRate.............................................................................................. 747
SBUS<sb>:UART:BORDer..............................................................................................747
SBUS<m>:UART:EWORd...............................................................................................747
SBUS<sb>:UART:PACKets............................................................................................. 748
SBUS<sb>:UART:PARity................................................................................................ 748
SBUS<sb>:UART:POLarity............................................................................................. 749
SBUS<sb>:UART:RX:HYSTeresis....................................................................................749
SBUS<sb>:UART:RX:SOURce........................................................................................749
SBUS<sb>:UART:RX:THReshold.................................................................................... 749
SBUS<sb>:UART:SBIT...................................................................................................750
SBUS<sb>:UART:SSIZe.................................................................................................750
SBUS<sb>:UART:TOUT................................................................................................. 750
SBUS<sb>:UART:TX:HYSTeresis.................................................................................... 751
Protocols