Rohde & Schwarz MXO 4 Series - Page 810

Remote control commandsMXO 4 Series
810User Manual 1335.5337.02 ─ 07
Usage: Query only
Asynchronous command
SBUS<sb>:LIN:FRAMe<fr>:IDSTate?
Returns the identifier state of the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<IdtfSt> OK | UART | CHCKsum | VERS | LENer | SPERror | PRERror |
SYERror | WAKeup | CPERror | INComplete | INER
*RST: OK
Usage: Query only
Asynchronous command
SBUS<sb>:LIN:FRAMe<fr>:IDValue?
Returns the identifier value of the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<IdtfVal> Range: 0 to 63
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
SBUS<sb>:LIN:FRAMe<fr>:STARt?
Returns the start time of the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<FrameStart> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
Protocols